• ꁸ Top
  • ꂅ +86 18923842907
  • ꁗ QQ service
  • ꀥ QR code

  • 1.PRODUCT DESCRIPTION

     

    Eltek Smartpack R 242100.120 Controller Module Monitor

    Future fit power. It is a simple idea with tremendous effect: Replace your old first-generation Smartpack controller with the Smartpack R to make your power system ready for a high-speed, high-capacity and connected tomorrow. This retrofit will bring your existing power system in line with current requirements, prolong its lifetime and thereby reduce both the lifetime operating costs and the need for new investments in power.

     

     

    Model Smartpack R
    Part number 242100.120
    INPUT DATA
    Voltage (nominal) 10 - 75 VDC
    Power Consumption 3 W (display sleep, no dist. CAN Power, LVD activation, no USB power)
    25 W (display on, dist CAN Power, LVD activation, USB Power)
    SYSTEM CONNECTIONS - SYSTEM  
    MONITORS
    Voltage sense, system voltage support 12 VDC, 24VDC, 48VDC & 60VDC
    Current sense, shunt support 0 - 20mV, 0-50mV, 0 - 60mV and 0-100mV
    Battery fuse monitoring Auxiliary switch NO/NC, Pull up/down
    Load fuse monitoring Auxiliary switch NO/NC, Diode Matrix Pull up/down
    Battery temperature monitoring AD590 sensor input
    Battery symmetry monitoring (built in) 4 x Analog Voltage[0-75V] inputs (12, 24 or 60V blocks)
    SYSTEM CONNECTIONS - LVD  
    CONTROL
    Battery disconnect 1 (latched or non-latched supported)
    Load disconnect 2 (latched or non-latched supported)
    GENERIC INPUTS AND OUTPUTS
    Digital configurations, Inputs #1-6 Auxiliary switch: NO/NC
    Analog configurations, Inputs #1-2 Analog Voltage[0-75V] (Configure as NO, NC, Diode Matrix sense or Voltage sense)
    Analog configurations, Inputs #3-6 Analog Voltage[0-75V] (Configure as NO, NC, Diode Matrix sense or Voltage sense) Support:
    Temperature sense w/ NTC probe
    Output configurations, Outputs #1-6 6x Relay–Dry/Form C - Configurable Normally Open/Closed [Max capacity 75V/2A/60W]
    CONTROL SYSTEM CONNECTIONS
    CAN Power Distributed CAN Power available +/- 500mA
    CAN Nodes Support: I/O Monitors, Battery String Monitor, Load/Current Monitor, Fleximonitor, AC Mains Monitor
    & Smartnode (legacy)
    USER INTERFACE
    Local Alphanumeric LCD display (Chinese Traditional and Simplified supported) & 3 keys
    Ethernet port 10/100 BASE-T (optional: 1000 BASE-T) IPv4/v6
    (eth 0: LAN port) IP protocols: HTTP (HTML5 Responsive User Interface) / SSL(TLS w/ self-signed certificate
    (eth 1: Craft port w/DHCP, USB Device generator or load authenticated certificates), SNMP v3 w/Generic MIBs & Enterprise MIB type: SP2-
    port) MIB (Eltek Branch 10), MODBUS TCP and pComm UDP (PowerSuite), VPN, VLAN, NTP, SFTP &RADIUS
    USB Host







    USB Device    		 Flash Drive for SWFW upgrade and XML configuration file loading
    Config read from Smartpack 1 Gen USB Device port
    wlan0: WiFi dongle for wireless craft port, wwan0: 4G USB Cellular Modem
    eth2: Ethernet Gigabit
    PC – pComm – Windows PowerSuite
    Serial ports RS-232 and RS-485 on RJ11 connector
    Serial protocols: MODBUS RTU Slave, MODBUS RTU/ASCII Master (several pre-defined types and
    full generic configurable data reader available), Modem Call-Back/SMS reporting (PSTN or GSM)
    and pComm (PowerSuite)
    GENERAL SPECIFICATIONS
    Dimensions (WxHxD) 109 x 44 (1U) x 156 mm (4.3 x 1.75 x 6.1”) [Chassis dept: 140 mm]
    Temperature Range Operating -20 to +65˚C (-40 to 149˚F)
    DESIGN STANDARDS
    Electrical safety UL 60950-1, 2ed, 2014-10-14, EN 60950-1:2006/A2:2013
    EMC ETSI EN 300 386 V.2.1.1, EN 61000-6-1(2007) /-2(2005) /-3(2012) /-4(2011),
    FCC CFR47 Part 15B section 109: 2010
    Environment ETSI EN 300 019: 2-1 v2.3.1 (Class 1.2), 2-2 v2.4.1 (Class 2.3) & 2-3 v2.4.1 (Class 3.2)
    2011/65/EU (RoHS) & 2012/19/EU (WEEE)
    Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-
    5-3:2016 clause 4.3, must be advised

     

     

ꄴPrevious： Eltek 241122.125 Flatpack S 48V Rectifiers 1800W HE 2U Power System 1800w 48v switching power supply
ꄲNext： Eltek Rectifier Module Flatpack2 220V/2000W HE 220V 2000W（Part No.: 241115.815）

Eltek Smartpack R 242100.120 Rectifier Controller Module Monitor

◆ Place of Origin：China
◆ Brand Name：Eltek
◆ Certification：CE
◆ Model Number：242100.120
◆ Minimum Order Quantity：1
◆ Price：260USD
◆ Packaging Details：Original Packed by Carton
◆ Delivery Time：1 week
◆ Payment Terms：T/T
◆ Supply Ability：200pcs/month
◆ High Light：242100.120 Retrofit Controller Module Monitor, 242100.120
녁Inquiry

PRODUCTS

넳 넲